3-pieces sleeve pack container for transportation of large-volume parts
Thanks to the injection molding manufacturing process, the CabCube provides robustness, precision and longevity. This distinguishes it from other products on the market that are normally manufactured by means of a deep-drawing process. With its 39 kgs, the CabCube is still very light and easy to handle. In just a few steps, the ring can be collapsed and, along with the pallet and lid, stacked on top of one another. The CabCube thereby achieves a volume reduction of up to 80 percent for a cost-effective and CO2 efficient return transport.
Technical data *1
l x w x h [mm]
|Forklift ground clearance [mm]||Wall thickness of sleeve [mm]||Flap opening (optional) [mm]|
||19,5||PE||1210 x 1010 x 190/200
|11,0||PP||1160 x 962 x 850
||600 x 300
||8,5||PE||1185 x 989 x 72
*1 Figures can vary depending on the raw material used and options applied. *2 Guideline values are based both on experience and parts of test ISO 8611, which tests with evenly distributed loads at room temperature (20°C). Varying data may result from different conditions of usage. Your specific requirements can be identified upon request. *3 Minimum quantity required. *4 Shipping quantity if snap-on bottom skids are not assembled yet. Self assembling of skids reduces freight charge. - PO pallets should only be used and stored in a dry environment. We reserve the right to change any of the stated information without prior notice.