Eye-Catcher

Pieces

* Minimum quantity required
** required


For the optimal display of fruit and vegetables

The Cabka eye-catcher is a modular add-on system for the display of fruit and vegetables in reusable and non-reusable packaging.

Properties and advantages


  • Increased commodity pressure through automatic lifting up of the goods
  • Overstacking or goods spillage is avoided
  • Nicer presentation on the shelves
  • Better presentation and sale of the goods
  • Protects goods and reduces write-offs
  • Cheap underlay to level out packaging of varying heights
  • Cheap alternative to foldable crates in order to prevent slippage on tilted shelves

Optimal goods display

The goal is to improve the display of fruit and vegetables on the shelves and thus increase commodity pressure. This is often achieved through multilayered stacking which damages the underlying goods, disturbs the arrangement of the products in the original packaging and seriously affects goods presentation. Inlays are also placed at the bottom of the packaging to lift up the goods, the necessary packing and unpacking however damages the goods and requires a high labour input.

The eye-catcher lifts the goods out of the packaging without prior packing and unpacking. Overstacking single-layered goods becomes redundant as the packaging appears fuller. Multilayered goods still appear numerous despite the small number of layers. Goods protection is increased and write-offs are reduced. 

The eye-catcher can be used with disposable and reusable packaging. In most trade chains fruit and vegetables are usually displayed in transport containers made of plastic, cardboard or wood. The variations in height of the containers are often levelled out with empty, folded plastic containers. This inappropriate usage of the transport containers leads to a high capital employed. The basic version of the eye-catcher is able to solve this problem with considerably lower capital costs.



A display with a system

The key feature of the Eye-Catcher system are lifting pins which are inserted into the base frame. With the help of a load-bearing insert, they push through the floor of the packaging and lift the products upwards.

Eye-Catcher with eight lifting pins inserted.

The packaging must be equipped with a product-bearing insert and eight corresponding holes at the bottom.

The full packaging can be placed on the Eye-Catcher.

The Eye-Catcher lifts the products into the desired position.

The supplier can already place the insert — as a printed cardboard version, for example — before filling the packaging. Alternatively, a plastic version can be placed underneath the goods in the store, with no need to unpack them beforehand. This is especially easy with flat packaging!

Technical data


DescriptionTypeDimensions [mm]
Large Eye-Catcher, flat, with lifting pinsEC 6401600 x 400 x 72
Small Eye-Catcher, flat, with lifting pinsEC 3401300 x 400 x 72
Large insert without roll-stopIL 6400600 x 400 x 03
Large insert with roll-stop, shortIL 6408 S600 x 400 x 80
Large insert with roll-stop, longIL 6408 L600 x 400 x 80
Small insert without roll-stopIL 3400300 x 400 x 03
Small insert with roll-stop, shortIL 3408 S300 x 400 x 80
Small insert with roll-stop, longIL 3408 L300 x 400 x 80


Technical information

The Eye-Catcher is suitable for use at temperatures of 0°C to 50°C. Its technical characteristics can be guaranteed under these conditions, assuming proper handling. Ask Cabka if the Eye-Catcher is suitable for your intended use. Cabka is not liable for any damages resulting from improper handling of the Eye-Catcher. Eye-Catcher incl. pins are produced from recycled polypropylene. Inlays are made from food-safe polypropylene.


Your Contact

Customer Service

Phone: +49 30 47 39 03 83 2


 

*1 Figures can vary depending on the raw material used and options applied. *2 Guideline values are based both on experience and parts of test ISO 8611, which tests with evenly distributed loads at room temperature (20°C). Varying data may result from different conditions of usage. Your specific requirements can be identified upon request. *3 Minimum quantity required. *4 Shipping quantity if snap-on bottom skids are not assembled yet. Self assembling of skids reduces freight charge. - PO pallets should only be used and stored in a dry environment. We reserve the right to change any of the stated information without prior notice.